For product and order enquiries please call
+44 (0)1827 875343 or email sales@edged-arts.co.uk

delivery van icon

Fast delivery from £3.99, calculated at checkout.

2.25lb Junior “Dayton” Pattern Axe. Made in the USA by Council Tools – CT-22BR

£26.95

Details

Top Quality “Dayton” Pattern Axe 28 inch – Made in the USA by Council Tools – Established in 1886

Junior Axe 2.25lb “Dayton” Pattern Axe.  (22BR)

All Council axe heads are drop forged from high quality tool steel. The forging is then processed in an abrasive robotic work cell where the trim lines are removed, the shape refined and the cutting edges are ground, which yields highly consistent heads. Cutting edges are then heat treated and tempered. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The final sharpening of the cutting edge is by hand using fine grit abrasives. Care is taken to not affect the tempered hardness of the bit. Heads are either painted or lacquered to deter rust and all polished surfaces are lacquered or oiled. American hickory handles are dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Handles are affixed to the heads using an extruded aluminum wedge which locks the head in a mechanical bond.

The Dayton Pattern axe is the most-recognized axe pattern. So named for originating in the Dayton Ohio area, this is a great all around axe pattern available in various head weights and handle options.

2.25 lb. Dayton axe head outfitted with a 28" curved hickory handle. Popularly referred to as a "boy's" axe. A "mid" sized tool. Dayton pattern originated from the Dayton, Ohio, area.

* Forged tool steel head. Made in USA.

* Hand sharpened, tapered bit for cutting and light splitting.

* ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.

* Heat coated with red enamel and cutting edge in clear lacquer to deter rust.

* 28" curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.

* Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite, and the aluminum choice of material is strong, lightweight, and does not change size with moisture content.

* The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2" of overall length of the handle is removed during assembly

Please note: You must be 18 years of age or over to purchase this axe. Axes will be delivered by courier and a signature from a person of 18 years of age or older will be required before parcels are handed over. You may be asked for proof of age.

All lengths and measurements are approximate

We carry a good range of Council Tool axes and other quality USA made tools. 

Additional Information

SKU CT-22BR
Length 28 inch Curved Hickory Handle
Imperial Weight 3.3 lb overall
Size 28 inch Handle

 2.25lb Junior  “Dayton” Pattern Axe.  Made in the USA by Council Tools – CT-22BR

More Views